JP Brand Hydraulic
Shearing Machine
|
Features |
Cutting
Capacity : 4 mm to 30 mm.
Lengths :
2500 mm to 6000 mm.
Easy to use
single axis NC Heavy Duty with
PLC and controller (optional)
Suitable for
shearing metallic and
non-metallic materials and can
be easily integrated for on-line
shearing applications such as
cut to length line, roll forming
line, coil built up line,
galvanizing line etc.
Clearance
between top and bottom blade can
be adjusted without feeler
gauges from minimum 0.05 mm
(required for shearing up to 32
swg sheets) to that required for
maximum rated capacity manually
by levers.
In
hydraulic shearing machine Built-in over
load protection protects the
machine and the blades against
damages due to overload.
Less power
consumption, least wear and tear
and minimum maintenance reduces
operating costs and down time.
Noiseless, vibration free
operation improves working
atmosphere. There is no
reduction in capacity due to
periodical wear hence unlimited
service life is obtained. The
stroke length is adjustable
according to the job length
reducing idle travel and
increasing productivity for
smaller jobs.
|
|
|
