 |
|
Manufacturers
and Exporters of "JP Brand
Precision and heavy machinery |
|
|
|
Tool Room Lathes
(Precision & Heavy Duty H-Series) |
|
|
|
Centre height |
Centre distance |
Spindle bore |
Speed range |
Threads |
|
175mm to 480 mm |
750mm to 4000mm |
50mm to 250mm |
35 to 2000 Rpm |
Metric-Module-Diametric-Whitworth |
|
JP Brand Tool room lathes are
combination of accuracy, simplicity and
affordability to its users. H-Series lathe
have just the right amount of engineering to
afford simplicity of operation, coupled with
plain and simple rugged reliability.
JP Brand H-Series Tool room Lathes comes
with a package of features which make the
machine to perform even the most complex
turning operation with higher level of
accuracy and rigidity.
|
|
 |
|
|
Fast
Facts |
-
Heavily ribbed single piece bed
which is hardened and precision
ground
-
Extra wide bed ways for rigidity and
stability in operation
-
Dynamically balanced components
-
Quick change gearbox for cutting
Metric-Module-Diametric-Whitworth
Threads and most of them can be cut
without changing gears
-
Fully geared headstock provides a
wide range of spindle speeds
-
Spindle is mounted on a set of
precision angular taper bearings
-
High chip cutting power with
accuracy and stability makes it a
complete solution for tool room
turning problems
|
|
|
Standard
Features |
-
Thread
dials
-
Steady rest
-
Follow rest
-
Chuck guard
-
Removable gap
-
Work light
-
Splash guard
-
Chip tray
-
Tool box
-
Test chart and high endurance
certificate
-
Instruction and maintenance manual
|
|
|
Optional
Features |
|
1.
|
Quick change tool post |
|
2.
|
4-Jaw chuck |
|
3.
|
3-Jaw chuck |
|
4.
|
Face plate |
|
5.
|
Electronic DRO |
|
6.
|
Hydraulic tracer |
|
7.
|
Taper turning attachment |
|
8.
|
Key cutting attachment |
|
9.
|
Tool post grinder attachment |
|
10.
|
4-Way rapid traverse system |
|
11.
|
Foot brake |
|
|
12.
|
Coolant system |
|
13.
|
Forced lubrication |
|
14.
|
Ball screw for cross traverse |
|
15.
|
Rear chuck |
|
16.
|
Tool post protection |
|
17.
|
Twin saddle |
|
18.
|
Auto movement of tailstock |
|
19.
|
Specific speed range |
|
20.
|
Specific motor HP |
|
21.
|
Additional steady rest |
|
22.
|
Revolving centre |
|
|
Model |
JP-L46 |
JP-L56 |
JP-L66H |
JP-L86H |
JP-L100H |
JP-L120H |
|
Height of Centre |
175mm/ 7" |
215mm/ 8.6" |
300mm/ 12" |
350mm/ 14" |
400mm/16" |
450mm/ 18" |
|
Distance between Centre |
750mm/ 30" , 1000mm/ 40" , 1500mm/
60" , 2000mm/ 80" , 2500mm/ 100" ,
3000mm/ 120" , 3500mm/ 140" ,
4000mm/160" |
|
Swing over Bed |
350mm/ 14" |
430mm/17" |
600mm/24" |
700mm/28" |
800mm/32" |
900mm/36" |
|
Swing in Gap |
510mm/20" |
580mm/23" |
725mm/29" |
825mm/33" |
925mm/37" |
1025mm/41" |
|
Swing over Cross Slide |
230mm/ 9" |
250mm/ 10" |
350mm/ 14" |
400mm/16" |
450mm/ 18" |
500mm/ 20" |
|
Width of Bed |
240mm/9.6" |
300mm/12" |
350mm/ 14" |
400mm/16" |
450mm/ 18" |
500mm/20" |
|
Hole through Spindle |
40mm |
53mm |
80mm |
105mm |
127mm |
127mm |
|
No.
Spindle
Speeds |
8, 54-1200 |
12, 25-1025 |
16, 35-2000 |
16, 35-2000 |
20, 35-2000 |
24, 35-2000 |
|
Whitworth Threads |
32, 4-60 |
32, 4-60 |
32, 4-60 |
32, 4-60 |
32, 4-60 |
32, 4-60 |
|
Metric Threads |
32,0.5-60 |
32,0.5-60 |
32,0.5-60 |
32,0.5-60 |
32,0.5-60 |
32,0.5-60 |
|
Cross Slide Travel |
255mm/ 10" |
300mm/ 12" |
400mm/ 16" |
450mm/18" |
500mm/ 20" |
550mm/ 22" |
|
Top Slide Travel |
75MM/ 3" |
125MM/ 5" |
175mm/7" |
175mm/7" |
175mm/7" |
175mm/7" |
|
Morse Taper of Sleeve |
MT3 |
MT4 |
MT4 |
MT5 |
MT5 |
MT5 |
|
Power |
2 HP |
3 HP |
3 HP |
5 HP |
5 HP |
7.5 HP |
|
|
